Description
Enerdrive 12v 125Ah Lithium Battery + EN3DC40+ 40A+ DC2DC Charger 2000W Inverter Combo
The ePOWER B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.
EN3DC40+ 40A DC2DC Enerdrive ePOWER Charger Included!
Lithium vs. AGM Capacity: 125Ah Lithium = 200Ah AGM
Smart Phone Monitoring System
The Enerdrive ePOWER B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the app to your smartphone or tablet device, you can monitor the following information:
- Battery Capacity
- Battery Voltage
- Battery Current (Amps)
- Battery State of Charge (SOC)
- Battery State of Health (SOH)
- Battery Status
- Individual Cell Voltage
- Battery Temperature
- Battery Cycles
- Battery Alarms
- Battery Event Information
Battery Management System
The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery
Enerdrive ePOWER 2000W True Sine Wave Inverter EN1120S
Enerdrive's ePOWER 1000W & 2000W compact true sine wave power inverters convert 12 volt (vehicle) power to 230 volt (household) power, allowing you to run loads of up to 2000 watts.
ePOWER Inverter Features:
- Australian GPO Outlets
- True sine wave output is ideal for operating motor loads, and to reduce stress on surge protection circuitry, meaning potentially longer equipment life
- Audio alarm with warning/error codes to alert user to check inverter condition before unit shutdown
- Automatic shutdown protects overload, over temperature and low/high battery conditions
- High surge capacity for products that require more power to start (2 x constant)
- High efficiency conversion of battery available power to AC power
- Mounting brackets for permanent installation
- Heavy duty DC battery stud connectors
- Includes 5V USB port
Enerdrive ePOWER Inverter Specifications:
Model – Description | ePOWER 400 | ePOWER 1000 | ePOWER 2000 |
---|---|---|---|
Part Number | EN1104S | EN1110S | EN1120S |
AC Output Power | 400W | 1000W | 2000W |
AC Output Current | 1.74A | 4.3A | 8.7A |
AC Surge Power (Peak) | 800W | 2000W | 4000W |
AC Output Voltage | 230 Vac / 50 Hz | ||
AC Output Waveform | True Sinewave | ||
AC Output Socket | 1 outlet | 1 outlet | 2 outlet |
Nominal DC Input Voltage | 12.5 VDC | ||
No Load battery draw | < 0.8 ADC | < 1.2 ADC | < 1.2 ADC |
DC Input Voltage operating range | 10.5 – 15.5 VDC | ||
Under Voltage Alarm | 11.2 VDC | ||
Under Voltage Shutdown | 10.5 VDC | ||
Under Voltage Recovery | 11.8 VDC | ||
Over Voltage Shutdown | 15.5 VDC | ||
USB | 5V, 1A | 5V, 750 mA | 5V, 750 mA |
Safety and Environmental | |||
Conformance | All required Australian Standards | ||
Agency Markings | RCM | ||
Operating Temperature | 0°C to 40°C | ||
Storage Temperature | -20°C to 60°C | ||
Relative Humidity | 5-90% noncondensing | ||
Operating Altitude | Up to 3000 meters above sea level | ||
Weights and Dimensions | |||
Weight | 1.73Kg | 2.9Kg | 5.5Kg |
Dimensions (W x L x H) | 177 x 200 x 90mm | 177 x 325 x 90mm | 230 x 416 x 110mm |
Warranty | 2 Years |
Load | Consumption | Estimate Run time |
---|---|---|
Cordless Phone | 5W | 80 hrs |
Clock/Radio | 8W | 65 hrs |
Table Lamp | 40W/60W | 22 hrs/ 15 hrs |
Freezer (8.8 cu. ft.) | 80W | 12 hrs |
20″ LCD TV | 100W | 10.5 hrs |
Refrigerator (18 cu. ft.) | 120W | 8.3 hrs |
Microwave (mid-size) | 1000W | 44 min |
Coffee Maker | 1200W | 35 min |
Vacuum | 1400W | 28 min |
Above run time is an estimate based on using a 12V-240AH battery bank for reference (Depth of discharge to 50%). Actual run time may vary.
Note: Specifications subject to change without notice
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.