Victron 12V Starters Pack


Lithium Battery: Enerdrive 125ah G2
Basic Starters Pack Only: 30a DC/DC 15a Mppt 15a 240v Charger
Price:
$2,338

Tax included

Stock:
In stock

Description

This is a complete starter's pack, which keep you charged up no matter where you are.

Basic Pack Includes

Blue Smart IP65 SLA/LiFePO4 Charger 12V 15A + Alligator Clips & M8 Eyelets BPC121531014R (AU/NZ Plug).

SmartSolar 12V/24V 15A Solar Charge Controller MPPT Type.

DC to DC Charger/Converter 30A Galvanic Isolated 10-17VDC Input to 10-15VDC Adjustable ORI121236120.

Orion-Tr Smart DC-DC Charger Isolated

Blue Smart IP65 SLA/LiFePO4 Charger

The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.

 

Featuring:

 

Water, dust and chemical resistant

Seven step smart charge algorithm with up to 95% efficiency

Includes preset charge algorithims optimally set for all common Lead Acid and Lithium Phosphate batteries.

User definable "Expert Mode" to alter presets to suit battery manufacturer technical specifications.

Low thermal stress on electrical components for longterm reliability

Recovery of fully discharged ‘dead’ batteries & partially reverse sulfation

Automatic power supply function

Severe cold performance: down to -30°C

Several other battery life enhancing features

Low power mode to charge smaller batteries

LiIon (LiFePO4) battery mode featuring a specific charging algorithm with Under-voltage protection

Setup and configure, readout of voltage and current by Bluetooth Smart

View indepth historical charge - cycle history for the connected battery.

Reverse Polarity, Short Circuit & Over Temperature protection

Operating Temperatures: -30 to +50 deg celcius

May also be used as a power supply. Power supply mode is available via the BluetoothSmart app.

 

 

Smart 7 step charging program:

The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance ...and a longer life.

 

These chargers come standard with preset algorithms which are optimally set for all common Lead Acid and Lithium Batteries. For Battery Manufacturer specific settings, Expert mode allows changing practically all parameters and time limits used by the charge algorithm.

 

Deep Discharge Recovery:

Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.

 

Easy Battery Connection:

The charger comes with both Alligator clips and M8 eyelets - making it easy to connect to the battery. If you wish, you can leave it permanently connected.

 

Remote Monitoring:

The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. 

 

Victron Connect:

Victron Connect lets you program, as well as get live status and historical information in Victron products with built-in bluetooth support or by using a VE.Direct Bluetooth Smart dongle.

 

History File:

View historical data for the last 40 charge cycles. Information supplied includes Start and End voltages, time spent in each charge cycle, amp-hours charged, Completion status of each charge and charge profile used.

 

 The MODE Button:

You can operate the Blue Smart charger range without the use of Bluetooth too! The MODE button provides access to all charging programs to ensure your battery is charged & maintained properly.

For Example: the charger can be switched to low current mode (see technical specifications) by pressing the MODE button for 3 seconds.

The MODE LED will blink when in low current mode. The low current mode remains activated until the MODE button is pressed again during 3 seconds

SmartSolar MPPT 75/15

SmartSolar MPPT 75/15 solar charge controller from Victron Energy with:

 12V/24V auto select battery voltage

15A rated charge current

220W @12V or 440W @24V maximum PV power

Automatic load disconnect

98% peak efficiency

Reverse polarity (fuse) protection, output short circuit protection, over temperature protection

 

 

Bluetooth Smart built-in: dongle not needed

The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.

 

VE.Direct

For a wired data connection to a Color Control panel, PC or other devices

 

Ultra-fast Maximum Power Point Tracking (MPPT)

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

 

Load output

Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life.

The load output is short circuit proof.

 

Battery Life: intelligent battery management

When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged' state and the ‘end of discharge' state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months.

The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.

 

Programmable battery charge algorithm

See the software section on our website for details

 

Day/night timing and light dimming option

See the software section on our website for details

 

Programming, real-time data and history display options

- Modern Apple and Android smartphones, tablets, macbooks and other devices: see the VE.Direct Bluetooth Smart dongle and the MPPT app discovery sheet for screenshots.

- ColorControl panel

 

Fully discharged battery recovery function will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.

 

Orion-Tr Smart DC-DC charger

The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.

 

For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.

 

The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.

 

Suitable for high temperatures up to 55°C with a full rated output up to 40°C.

 

Bluetooth Smart enabled

Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to

change settings and to update the charger when new software features become available.

 

Fully programmable

 

Battery charge algorithm (configurable) or fixed output.

Smart alternator compatibility: engine running detection mechanism.

Adaptive 3-stage charge algorithm: bulk – absorption – float

 

For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.

For lithium batteries absorption time is fixed, default 2 hours.

Alternatively, a fixed output voltage can be chosen.

Remote on-off

A remote on/off switch or relay contact can be connected to a two-pole connector.

Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).

 

All models are short circuit proof and can be paralleled to increase output current

An unlimited number of units can be connected in parallel.

 

High temperature protected

The output current will reduce at high ambient temperature.

 

IP43 protection

When installed with the screw terminals oriented downwards.

Screw terminals

No special tools needed for installation.

Suitable for use in vehicles with a smart alternator (Euro 5 and Euro 6 engines) The built-in engine shutdown detection will stop the converter when the engine is not running. This prevents unwanted discharge of the starter battery (see manual for details)

Payment & Security

American Express Apple Pay Google Pay Mastercard Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed