Enerdrive ePOWER B-TEC 100Ah Slimline Lithium Battery DC Charger Pack

Save 6%

Price:
$1,590 $1,699

Description

ENERDRIVE EPOWER B-TEC 100AH SLIMLINE LITHIUM BATTERY DC CHARGER PACK
Pack Includes:

1 x Enerdrive ePower B-TEC 12V 100Ah Slim Lithium Battery (EPL-100BT-12V-SLIM)
1 x Enerdrive DC2DC Battery Charger - 12V 40A (EN3DC40+)

Enerdrive ePower B-TEC 12V 100Ah Slim Lithium Battery

Enerdrive B-TEC 100AH Slim Battery is an ideal solution for those who are limited for space. The battery provides the same DNA as of all other Enerdrive B-Tec batteries. With the high-quality prismatic cells, the 100Ah battery is suitable for up to 1000 Watt inverter. Additionally, it provides the best aftersales support program in Australia. It fits perfectly positioned behind the back seat of most dual cab utes and narrow spaces in other locations.

Specifications:

Amp Hours (ah): 100Ah
Battery Voltage: 12V
Dimensions: 551 x 101 x 239 mm (LxDxH)
Weight: 12.4 kg
Battery Chemistry: LiFePO4 Prismatic Cell
Battery Format: 4P x 4S (3.2V per Cell)
Charge Voltage: 14.4v – 14.6v
Standby / Float Voltage: 13.5 – 13.8
Charge Temperature: 0 - 45°C
Discharge Temperature: -20 - 60°C
Nominal Charge Current: 20A - 50A
Max Charge Current: 80A – 30Min @ 25°C
Low Cell Voltage Disconnect: <2800mV
High Cell Voltage Disconnect: >3900mV
Warranty: 5 Years
Smart Phone Monitoring System

The Enerdrive Enerdrive B-TEC G2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;

Battery Capacity
Battery Voltage
Battery Current (Amps)
Battery State of Charge (SOC)
Battery State of Health (SOH)
Battery Status
Individual Cell Voltage
Battery Temperature
Battery Cycles
Battery Alarms
Battery Event Information
Battery Management System

The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

Size & Weight Savings

Lithium v AGM Capacities;

100Ah Lithium = 160Ah AGM
125Ah Lithium = 200Ah AGM
200Ah Lithium = 320Ah AGM
300Ah Lithium = 480Ah AGM
(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).

The Enerdrive B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.

The Enerdrive B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.

With over 7 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.

With over 3000 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.

Please Note; The B-TEC battery is capable to be paralleled to a second B-TEC battery of the same size. For maximum performance and lifespan of your B-TEC battery, no more than 2 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS.

The 100Ah battery is able to accept a maximum inverter capacity of 1000W only. Exceeding the maximum inverter capacity can damage the BMS Management within the battery.



Enerdrive DC2DC Battery Charger - 12V 40A

The Enerdrive 40amp DC2DC Battery Charger with combined Solar Regulator is designed to accept multiple voltage inputs allowing you to charge your batteries through your vehicles alternator or your caravans solar panels. This means you can take advantage of the vehicles alternator whilst moving and your solar panels while you are stationary. The unit will automatically detect and select the best available input source for you. Most other DC2DC chargers do not have this capability and a separate solar controller is needed.

DC2DC Battery Charger 40A /12V

Multiple charging inputs allow you accept voltage from your engine and solar panels and convert to 1 output to your battery bank.
Large battery cable connections - DC M6 screw terminals
Includes inbuilt (MPPT) solar regulator
Ability to charge Lithium, Lead Crystal, GEL, AGM, Wet Cell and also create custom profiles.
Accepts 12 or 24v from your vehicle and a maximum solar input of 45V/800W
Thermo controlled fan cooling allows 40A output up to 40+°C
Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
Temperature sensor included in charger for more accurate battery charging
Looking for this DC to DC Charger with a full wiring kit including resettable circuit breakers? Click here!

During normal operation the ePOWER DC2DC+ Battery Charger will do a full charge cycle to float stage on the house battery bank with ability to choose either GEL, AGM, Flooded, Custom Programmable or Lithium. Once float stage is reached the charger transitions to a power supply mode to support any on-board DC loads.

Multistage Charging Process

The ePOWER DC2DC+ Battery Charger is a fully automatic, set and forget charger. It is designed to quickly and accurately recharge your deep cycle batteries utilising charger algorithms that help to maximise the life of your specialised deep cycle batteries.

The ePOWER DC2DC+ Battery Charger features multistage smart charging technology that enables the charger to be connected to your battery bank permanently. With the input of multiple sources, you can be assured of charging your batteries whenever underway; or when the sun is shining on your solar array.

As dictated by battery manufacturer’s recommendations, deep cycle batteries require a multistage charge sequence for perfect, fast and accurate charging. The Enerdrive ePOWER DC2DC+ smart charger delivers three primary charge stages.

Stage 1 – Bulk or Boost charge; The battery is charged at full rated output current of the charger until the battery reaches its final charging voltage, known as its absorption voltage. In this step, around 80% of the battery is recovered as fast as possible.

Stage 2 – Absorption Charge; With the charger voltage held steady, the remaining 20% is replaced with the charger allowing the current to taper off as the battery approaches full charge.

Stage 3 – Float; Finally, in the float stage the charger voltage is lowered and held at a constant and safe predetermined level. This prevents the battery from being overcharged, yet allows the charger to supply enough current to make up for the self-discharge losses of the battery, while supporting any additional loads connected to the battery (such as DC lighting and refrigerators). This stage allows for the charger to be used as a DC power supply.

Smart Charging Feature

The ePOWER DC2DC+ Battery Charger will regulate its output based on the loads connected to your battery bank. This function is important to maintain the life of your battery bank as some battery chargers mistake loads for discharge and continue to keep the batteries in the bulk or absorption stage for extended periods of time, which will damage the battery bank. The ePOWER DC2DC+ Battery Charger has two methods of load based regulation to ensure your battery charger transitions to float when it should do so.

Battery Temperature Sensor

Included standard with all ePOWER Battery Chargers.

Specifications:

Model: EN3DC40+
Output Current: 40A
Charger Mode Output Voltage: 13.8V - 15.5V
Float: 13.0V - 13.8V
Equalize: 15V
Charging Control: 3 Stages
DC Output: Single
Battery Compatablity: Gel, AGM, Flooded, Program
Charger Efficiency: 95%
Temperature Setting: Low/Normal/High (Battery Temperature Standard)
Dimensions: 242mm(L) x 172mm(W) x 74(H)mm
Weight: 1.9Kg

Payment & Security

American Express Apple Pay Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed